国产综合亚洲区

    <code id="jhnoe"></code>
  1. <object id="jhnoe"></object>
    <code id="jhnoe"></code>
  2. News

    What are the maintenance procedures for knitting machines?

    Update:04 Aug 2020
    Summary:

    Knitting machines are equipment used for weaving. Due t […]

    Knitting machines are equipment used for weaving. Due to the continuous rapid development of society and the continuous development of science and technology, the performance of the equipment is constantly improving, and the use effect is more obvious; now people have higher and higher requirements for various materials. It has also led to the fact that the original equipment has been difficult to meet people's requirements. The current knitting machine has high working efficiency, stable operation, and very long service time. Let me introduce the maintenance process of the knitting machine.

    1. Check whether the lubrication in the braiding machine case is within the specified range, pick up the oil drop to ensure that the oil volume is in the center of the two lines, but do not avoid excessive lubricating oil spraying

    2. Check the lubricating oil of the turbine box on the braiding machine, which can be visually inspected by the oil glass, and the lubricating oil should be added when it is lower than half of the oil glass
    3. The impeller and shaft of the braiding machine should be lubricated and wiped clean before the start of each shift to prevent foreign matter from jamming the ingot

    Four, all transmission gear parts of the braiding machine should be properly lubricated and maintained

    5. Carry out appropriate amount of lubrication and maintenance for the light part of the light-sensitive cable of the knitting machine

    6. It must be confirmed that there are no obstacles within the motion range of the knitting machine

    7. Tighten the screws of the transmission and connection parts of the braiding machine to avoid loosening and affecting the operation of the machine

    8. Before operating the braiding machine, please run it at a low speed for about 5 minutes before increasing the speed.

     

     

     

    32

    国产综合亚洲区

      <code id="jhnoe"></code>
    1. <object id="jhnoe"></object>
      <code id="jhnoe"></code>